Standard Accessories
Collect chuck with threaded nose ring, All electrical switcheears & wires instruction book for operation & maintenance.
Optional Accessories
Automatic longitudinal feed complete with electricals, machine vice, coolets, Coolant Pump.
Swivelled Head
The drill head can be swivelled through 45 degree. Vertically to either side and the angular position can be read- from the scale calibrated on the large flanged surface. The head is locked in position by single locking lever provided at the back of the flanged mountings. A fixed taper pin is provided for zero degree vertical location of the head and two threaded pins are provided for location of 45 degree angular positions. The main column cab be raised or lowered by rack and pinion arrangement. The work table assembled with taper wedges is provided with 3-T-slots on the top.
Coolant Assembly
(Extra Coolant Tank, Pump & Fittings) The coolant system is housed in the base stand. The coolant tank can be removed from the base along with pump from the front window for cleaning and refilling.
Electricals
To ensure safety of electric motors overload and under voltage releases have been provided.
Vertical Miller
The NVM-25 Vertical Miller is useful for operations such as drilling light milling, boring, reaming, spot facing and counter sinking in one setup. The gear box provides 4 ratios, which can combined with 2 speeds of motor, gives a total of 8 speeds. The spindle nose is provided with a threaded nose ring to securely hold the collect chucks, boring heads, etc. The built in ejector eliminates the.