EXTRA HEAVY DUTY ALL GEARED LATHE MACHINE-MODEL : CHIPMAX-600 SERIES PLANNER BED

SPECIFICATION
CHIPMAX-600
CHIPMAX-650
CHIPMAX-700
CHIPMAX-750
TYPE
All Geared Lathe Machine
Admit Between Center 450mm - 10000mm 450mm - 10000mm 450mm - 10000mm 450mm - 10000mm
Center Height 600mm 650mm 700mm 750mm
Swing over Bed 1200mm 1300mm 1400mm 1500mm
Swing over Cross Slide 800mm 900mm 1000mm 1100mm
Swing in Gap 1525mm 1625mm 1725mm 1825mm
Width of Bed 600mm 650mm 700mm 750mm
Width of Gap 300mm 300mm 300mm 300mm
Spindle Nose / Bore / Taper A2-11/125mm/MT-6 A2-11/125mm/MT-6 A2-11/125mm/MT-6 A2-11/125mm/MT-6
Spindle Speed / Range 12/20-600rpm 12/20-600rpm 12/20-600rpm 12/20-600rpm
Main Motor 10hp 10hp 10hp 10hp
 
SPECIFICATION
CHIPMAX-800
CHIPMAX-850
CHIPMAX-900
CHIPMAX-950
TYPE
All Geared Lathe Machine
Admit Between Center 450mm - 10000mm 450mm - 10000mm 450mm - 10000mm 450mm - 10000mm
Center Height 800mm 850mm 900mm 950mm
Swing over Bed 1600mm 1700mm 1800mm 1900mm
Swing over Cross Slide 1200mm 1300mm 1400mm 1500mm
Swing in Gap 1925mm 2025mm 2125mm 2225mm
Width of Bed 800mm 850mm 900mm 950mm
Width of Gap 300mm 300mm 300mm 300mm
Spindle Nose / Bore / Taper A2-11/125mm/MT-6 A2-11/125mm/MT-6 A2-11/125mm/MT-6 A2-11/125mm/MT-6
Spindle Speed / Range 12/20-600rpm 12/20-600rpm 12/20-600rpm 12/20-600rpm
Main Motor 10hp 10hp 10hp 10hp

Hardened and ground bed, Hardened & Ground Spindle Nose, Norton Gear Box with Change Gears for Metric/Inch Thread, Turcite-B lining in saddle Guideways, complete with Electric Motor and Electricals, Machine is Tested to IS-1878 (Part) 1993

Standard Accessories

Complete with electrical for 415 volts, 50 cycles, 3ph supply, Carrier Plate, Center Bush, 2Nos. MT Dead Center, Toolpost spanner, thread dial indicator, 4 way tool post and instruction manual with beam packing.

Optional Accessories
Face plate 4 Jaw Independent Chuck Rear Splash Guard 1 mtr.
Chuck Plate 2-Pin Steady Rest BRG. Type Machine Lamp
3 Jaw True Chuck Revolving Center Coolant Pump
Product Range