MEDIUM DUTY ALL GEARED PRECISION LATHE MACHINE - MODEL : GNM-1 SERIES

Specifications
GNM-1
GNM-2
Center Height 175mm 175mm
Admit Between Center 650mm 1000mm
Swing over Bed 350mm 350mm
Swing over Cross Slide 215mm 215m
Swing in Gap No Gap No Gap
Bed Width 240mm 240mm
Spindle Nose / Bore / Taper Threaded . 41mm / MT-5 Threaded . 41mm / MT-5
Spindle Speed / Range 8 / 75 - 1500rpm 8 / 75 -1500rpm
Motor Hp 2hp / 1.5 kw 2hp / 1.5 kw
Lead Screw Diameter / Thread
 25.4 mm / 6 TPI 25.4 mm / 6 TPI
Thread Metric Pitches / Nos. 0.5 to 6 mm pitches / 17 0.5 to 6 mm pitches / 17
Thread Inches / Nos. 4 to 22 TPI / 54
 4 to 22 TPI / 54
Feeds Longitudinal 0.015 to 0.86 mm / rev. 0.015 to 0.86 mm / rev.
Feeds Cross 0.5 times of ling. feed 0.5 times of ling. feed
Tailstock Quill Diameter 50 mm 50 mm
Tailstock Quill Travel / Taper 140 mm / MT-3 140 mm / MT-3
Net Weight / Gross Weight 900 Kgs. / 1100 Kgs. 1000 Kgs. / 1200 Kgs.
Shipping Length 1.90m x 1.14m x 2.72 Cubic Meter 1.90m x 1.14m x 2.72 Cubic Meter

Hardened and ground bed, Hardened & ground gears in headstock, Threaded Nose Spindle, Norton Gear Box for Metric/INCH Thread with Electric Motor and Electricals, Machine is Tested to IS-1878 (Part) 1993.

Standard Accessories

Complete with electrical for 415 volts, 50 cycles, 3ph supply, Carrier Plate, Center Bush, 2Nos. MT-3 Dead Center, Tool post spanner, thread dial indicator, 4 way tool post and instruction manual with beam packing.

Optional Accessories
Face plate Steady Rest PAD Type Rear Splash Guard 1 mtr. Machine Lamp
Chuck Plate Steady Rest BRG Type Taper Turning Attachment Coolant Pump
3 Jaw True Chuck Follow Rest PAD Type Rear Toolpost Foot Operating Brake
4 Jaw Independent Chuck Revolving Center Quick Change Toolpost  
Product Range